Feeding Tape; Feed & Cut; Feed Only- Page 27

1

2

3

4

5

6

7

8

9

20

z

 GETTING

 STARTED

Feeding Tape

Feed & Cut 

The Feed & Cut function feeds 0.92" (23mm) of blank tape then cuts the tape.

Hold down the 

Shift

 key and press the 

Preview

 key.

 "Feed & Cut?" will appear on the LCD display.

Using the   or   key to select the "Feed & Cut" option and then press either 

OK

 or 

Enter

.

The message "Feeding Tape... Please Wait" appears while the tape is fed, and 

then the tape is cut.

Feed Only

This function will advance the tape approximately 0.92" (23 mm) resulting in a blank 
label sticking out of the tape cassette. This action is recommended when using Fabric 
and Extra Strength Adhesive tapes, which should be cut using scissors.

Hold down the 

Shift

 key and press the 

Preview

 key.

 "Feed & Cut?" will appear on the LCD display.

Using the   or   key to select the "Feed Only" option and then press either 

OK

 or 

Enter

 key.

The message "Feeding Tape... Please Wait" appears while the tape is fed.

Feeding Tape

• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape 

cassette.

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon 

to be discharged with the tape.

• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the 

tape to jam.

1

2

To exit or cancel this function press 

Escape

.

1

2

To exit or cancel this function press 

Escape

.