Setting Bar Code Parameters; Bar Code Settings; Bar Code- Page 57

1

2

3

4

5

6

7

8

9

50

z

 EDIT

ING A LA

BEL

Creating a Bar Code Label

Setting Bar Code Parameters

Press the 

Setup

 key to display the Setup menu, select “Bar Code Setup” using 

the   or   key, and then press the 

OK

 or 

Enter

 key.

The Bar Code Setup screen is displayed.

Select an attribute using the   or   key, and then set a value for that attribute 
using the   or   key.

Press the 

OK

 or 

Enter

 key to apply the settings.

z

Bar Code Settings

z

1

Pressing 

Bar Code

 key while holding down the 

Shift

 key will also allow you to go 

to "Bar Code Setup".

2

Characters may not appear below the bar code even when "On" is selected for "Under #", 

depending on the tape width being used, the number of lines entered, or the current 

character style settings.

3

• New settings are NOT applied if you do not press the 

OK

 or 

Enter

 key.

• The "C-Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR 

protocols

• Press  the 

Escape

 key to return to the previous step.

• Press  the 

Space

 key to set the selected attribute to the default value.

• Refer to the Bar Code Settings table for a list of all available settings.

Attribute

Value

Protocol

CODE39

, CODE128, EAN-8, EAN-13, 

GS1-128 (UCC / EAN-128), UPC-A, UPC-E, I-2/5 (ITF), 

CODABAR

Width

Small

Large

Under#

(characters printed 

below bar code)

On

Off

C.Digit

(check digit)

Off

On

(only available for the CODE39, I-2/5 

and CODABAR protocols)