Tape Cutting Options; Tape Cutting; LABEL PRINTING- Page 64

LABEL PRINTING

57

Tape Cutting Options

The tape cutting options allow you to specify how the tape is fed and cut when printing 
labels. In particular, the “Chain” and “No Cut” options greatly reduce the amount of 
wasted tape by using smaller margins and eliminating blank sections cut between 
labels.

Press the 

Label

 key to display the Label menu.

Select "Cut Option" using the   or   key, and then set the value by using the   
or  

key.

Press the 

OK

 or 

Enter

 key to apply the settings.

z

Tape Cutting

z

Tape Cutting Options

1
2

3

New settings are NOT applied if you do not press the 

OK

 or 

Enter

 key.

• Press  the 

Escape

 key to return to the previous step.

• Refer to the Tape Cutting table for a list of all available settings.

Setting

Description

Example

Large 

Margin

Automatically cuts the tape after each label is
printed, leaving a margin of 0.94" (24 mm) on 
each end.

Small 

Margin

Automatically cuts a piece of blank tape 
before printing the first label and then cuts the 
tape after each label is printed, leaving a 0.16" 
(4 mm) margin at each end of each label.

Chain

• Automatically cuts a piece of blank tape 

before printing the first label and then cuts 
the tape after each label is printed, leaving 
a 0.16" (4 mm) margin at each end of each 
label.

• Once the last label is printed, the tape is not 

fed and cut.

ABC

ABC

0.94" 

(24 mm)

0.94" 

(24 mm)

ABC

ABC

0.16" 

(4 mm)

0.16" 

(4 mm)

0.92" (23 mm)

ABC

ABC

0.16" 

(4 mm)

0.16" 

(4 mm)

0.92" (23 mm)