Specify the tape width to be used for ; A.If only one printer has been selected; B.If multiple printers have been selected- Page 37

36

5

Specify the tape width to be used for 
printing. 
A.If only one printer has been selected

In the dialog box from step 

4

, select the 

printer whose setting is to be specified, 
and then either double-click it or right-
click it and click “Settings”. From the “Set 
Width” drop-down list, select the tape 
width.

B.If multiple printers have been selected

In the dialog box from step 

4

, select the 

printers whose setting are to be specified, 
and right-click them and click “Settings”. 
From the “Set Width” drop-down list, 
select the tape width. The same tape 
width setting is applied to all selected 
printers.

6

Click [OK] to close the tape width setting 
window.

7

Click [OK] to close the “Distributed 
Printing Settings” window.

Setup is completed.

8

Click [OK] to start distributed printing.

Note

●

Information to be displayed in the dialog 
box from step 

4

 can be entered in the 

“Notes” text box.

Note

●

The settings below “Printer Settings” and 
“Notes” are not available.

Note

●

If the selected tape width is different from 
that displayed beside “Current Width”, 

appears beside the setting below 

“Current Width”. Load the printer with 
tape of the width specified “Set Width”.

●

It may not be possible for information to 
be detected for a printer connected using 
the PS-9000 or any common USB hub or 
print server. 
Before printing, enter the settings 
manually, and check if the printer can be 
used for printing.

●

Depending on whether a router is used 
and the security features in use, such as a 
firewall, it may not be possible to use this 
function.

●

We recommend performing a connection 
test for your operating environment. For 
more information, contact a sales 
representative.