Setting the fabric in the ; Embroidery set (medium); Embroidery frame (small) (optional) - Page 129

Brother SE-270D User's Guide

2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

Preparing the fabric

123

4

 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 

Setting the fabric in the 
embroidery frame

The fabric is stretched on the embroidery frame. If the 
fabric is loose, the quality of the embroidery pattern 
may be poor. Put the fabric in the frame without slack 
following the steps below. Have a fabric with a 
stabilizer material attached and the embroidery frame 
(medium), (small) and (large) ready.

Embroidery set (medium)

Patterns with a height of up to 10 cm (4 inch) and 
a width of up to 10 cm (4 inch) can be sewn. 

Embroidery frame (small) (optional) 

Patterns with a height of up to 2 cm (1 inch) and a 
width of up to 6 cm (2-1/2 inch) can be sewn. 
This is used for letters and other small 
embroidery.

• There are patterns for which embroidery 

frame (small) cannot be used. 

Embroidery frame (large) (optional)

Embroidery can be done in an area with a height 
of up to 17 cm (6-7/10 inch) and a width of up to 
10 cm (4 inch) . This is used to embroider 
multiple patterns without changing the fabric 
position in the frame. 

CAUTION

a

Loosen the embroidery frame adjustment 
screw and remove the inner and outer frames, 
placing the outer frame on a flat surface. 

Separate the inner and outer frame by removing 
inner frame upward.

a

Inner frame

b

Outer frame

c

Adjustment screw

b

Place the fabric with the stabilizer material on 
top of the outer frame. 

Have the front side of the cloth up.

a

Front

c

Press the inner frame in from the top of the 
fabric. 

Line up 

 on the inner frame and 

 on 

outer frame.

d

Tighten the adjustment screw by hand just 
enough to secure the fabric.

Use the embroidery frame that matches 
the size of the pattern being embroidered. 
If the wrong size embroidery frame is 
used, the embroidery frame may be hit by 
the presser foot and cause injury or 
needle breakage. 

1

2
3

1

Detailed Information for Brother SE-270D User's Guide

Lists of information found in Brother SE-270D User's Guide - Page 129

  • There are patterns for which embroidery frame (small) cannot be used.

Related Documents for Brother SE-270D User's Guide