How to use the thread spool cap; How to use the thread net; CHAPTER 2 - Page 16

14

CHAPTER 2  

PREPARATION BEFORE THREADING

Thread tree

Raise the telescoping thread tree to its highest 
position. Make sure that the thread holders are 
in alignment above the spool pins as illustrated 
below.

1

 Thread holder on thread tree

2

 Spool pin

3

 Correct position

How to use the thread spool cap

When using sewing thread spools, the thread spool 
cap should be used as illustrated below. Make sure 
that the spool notch is on the bottom. 

 1

 Thread spool cap

How to use the thread net

If you are sewing with loosely spun nylon thread, 
we recommend that you cover the spool with the 
net supplied to prevent the thread from slipping off 
the spool.  
Adapt the net to the shape of the spool. 

Before threading

1.  Turn off the main power and light switch for 

safety.

2.   Raise the presser foot using presser foot lever.

3.  Turn the hand wheel so that the mark on the 

hand wheel <A> is aligned to the line <B> 
on the machine. (See CHAPTER 1 "Turning 
direction of hand wheel".) 

<A>

<B>