Threading the upper looper- Page 19

17

English

5.  Guide the thread down the channel and 

pass the thread through the threading 
points 

5678

 next to the green color 

marks following the numerical order in the 
accompanying illustration.

NOTE: 
Make sure to thread only through the upper 
thread take up 

7

.

6.  Pass the thread through the eye of the upper 

looper 

9

.

NOTE: 
If the upper looper thread breaks during sewing: 
This may be caused by the lower looper thread 
getting caught on the upper looper. If this happens, 
lower the upperlooper by turning the hand wheel, 
remove the lower looper thread from the upper 
looper, and re-thread the upper looper from at 
least the tension disc.

Threading the upper looper

Run the thread in the sequence illustrated, 
following the green color and the numbers next to 
each threading point.

1.  Open the front cover by sliding to the right and 

guiding the top toward you.

2.  Pull the thread off the spool and directly up 

through the thread holder 

1

 and the thread 

plate 

2

 on the thread tree from back to front.

3.  Pass the thread thourgh the hole 

3

 on the top 

of machine.

4.  Pass the thread through the tension disc 

4

which is in the channel next to the green 
tension adjustment dial.