Creating Embroidery Patterns; Transferring data to embroidery ; machines via a USB media- Page 19

17

Creating Embroidery Patterns

Cr
eat

ing Embroide

ry Pat

ter
ns

3.

Click 

OK

.

4.

When the writing is finished, the following 
message appears. Click 

OK

.

c

“Transferring to a machine by using an 
original card” on page 52.
For details on saving embroidery 
patterns, refer to “Saving” on page 18.

5.

Insert the original card into the card slot of the 
sewing machine.

■

Transferring data to embroidery 
machines via a USB media

1.

Plug the USB media into the computer.

2.

Click , 

then 

, 

then , 

then 

.



Data transfer begins.

3.

When the transferring is finished, the following 
message appears. Click 

OK

.

4.

After an embroidery pattern is transferred, 
remove the USB media from the computer.

5.

Insert the USB media into the USB port on the 
machine.

a

Note:

• When writing to an original card that 

already contains data, all data on the card 
will be deleted. 

• Before using an original card, check that 

the designs on the card are no longer 
needed.

c

“From an embroidery card” on 
page 50

• If you wish to keep the designs, store them 

on a hard disk or other storage media.

a

Note:

Precautions for using the Card Writer 
Module/original cards

• The original card is inserted correctly 

when you hear it snap into place.

• Never remove an original card or unplug 

the USB cable while the LED indicator is 
flashing.

b

Memo:

For details on using the embroidery machine, 
refer to the Operation Manual included with it.

XE8656-001.book  Page 17  Thursday, June 30, 2011  2:56 PM