Lower Threading; Setting the bobbin improperly may cause the thread ten-; sion to loosen, breaking the needle and resulting in injury.- Page 41

29

2

1

2

1

Lower Threading

CAUTION

Setting the bobbin improperly may cause the thread ten-
sion to loosen, breaking the needle and resulting in injury.

1

Wound evenly

2

Wound poorly

CAUTION

Be sure to turn off the power.  If you accidentally step on the
foot controller and the machine begins to operate, injury
could result.

1. Raise the needle to its highest position by turning the balance

wheel toward you (counterclockwise) and raise the presser foot
lever.

2. Slide the button and open the cover.

1

Slide button

2

Cover

3. Insert the bobbin so the thread comes out in the direction shown

by the arrow.

*

Use bobbins intended for use with this machine.

CAUTION

Be sure the bobbin is set so the thread unrolls in the correct
direction. If the thread unrolls in the wrong direction, it may
cause the thread tension to be incorrect or the needle to
break.

Hold the thread end, push the bobbin down with your finger, and
pass the thread securely through the thread cutting groove.

4. Replace the bobbin cover. Place the left tab in place (see arrow

1 at left), then press lightly on the right side (see arrow 2 at left)
until the cover clicks into place.

*

Insert the cover so that the end of the thread comes out from the
back of the cover (as shown by the slanted line in the illustration
at the left).

1

2

T

ABLE OF CONTENTS

KNO

WING Y

OUR

SEWING MA

CHINE

STRAIGHT AND

ZIGZA

G STITCHING

B

UIL

T

-IN STITCHES

BUTT

ONHOLE AND

B

UTT

ON SEWING

USING A

T

T

A

CHMENTS

AND APPLICA

TIONS

MAINTENANCE

INDEX