Matching Transmitter(s) To Your Vehicle- Page 73

yellow

blue     

2-13

To replace the battery:

1. Insert a flat object like a dime into the slot on the

back of the transmitter. Gently pry apart the front
and back.

2. Remove the old battery and replace it with the new

one. (Use type CR2032 or an equivalent.) Make sure
the positive (+) side of the battery is facing down.
Do not use a metal object to remove the old battery.

3. Snap the top and bottom together, making sure the

halves are together tightly so water won’t get in.

4. Test the operation of the transmitter with your

vehicle. If the transmitter does not work, try
resynchronizing the transmitter. (See
“Resynchronization” following.)

5. Resynchronize and then test the transmitter.

Resynchronization

Resynchronization may be necessary due to the security
method used by this remote keyless entry system. The
transmitter does not send the same signal twice to the
receiver. The receiver will not respond to a signal it has
previously been sent. This prevents someone from
recording and playing back the signal from the transmitter.

To resynchronize the transmitter with the receiver, do
the following:

1. Stand close to your vehicle.

2. Simultaneously press and hold the LOCK and

UNLOCK buttons on the transmitter for about seven
seconds. The door locks should cycle (lock and
unlock) to confirm resynchronization.

If the locks do not cycle, see your dealer for service.