Heating; Heating (Engine Coolant Heater); Air Conditioning- Page 140

3-3

BI

-

LEV: This setting brings in outside air and directs 

it two ways. Half of the air is directed through the
instrument panel outlets. Most of the remaining air is
directed through the floor ducts and a little to the defrost
and side window vents.

HTR: This setting sends most of the air through the
ducts near the floor. The rest comes out of the defroster
and side window vents.

BLEND: This setting allows half of the air to go to the
floor ducts and half to the defroster and side window
vents. The air conditioning compressor will run
automatically in this setting unless the outside
temperature is below 40

_

F (4

_

C). (Even when the

compressor is running, you can control the temperature.)

 DEF: This setting directs most of the air through

the defroster and side window vents. Some of the air
goes to the floor ducts and the side window vents. 
The air conditioning compressor will run automatically
in this setting unless the outside temperature is below 
40

_

F (4

_

C). (Even when the compressor is running, 

you can control the temperature.)

 A/C: Press this button to turn the air conditioning

on and off. The system will cool and dehumidify the air
inside the vehicle when the A/C light is on.

Heating

On cold days, use HTR with the Driver and Passenger
levers all the way in the red area. This system will bring
in outside air, heat it, and send it to the floor ducts.

Heating (Engine Coolant Heater)

If your vehicle has an engine coolant heater, you can use
it to help your system provide warm air faster when it’s
cold outside 

--

 0

_

F (

-

18

_

C) or lower. An engine coolant

heater warms the coolant your engine and heating
system use to provide heat. See “Engine Coolant
Heater” in the Index.

Air Conditioning

On very hot days, open the windows long enough to 
let hot, inside air escape. This reduces the time for the
vehicle to cool down.

For a quick cool

-

down on very hot days, use MAX 

with the temperature lever’s all the way in the blue area.
If this setting is used for long periods of time, the air in
your vehicle may become too dry.

For normal cooling on hot days, use VENT with the
temperature lever’s in the blue area. The system will
bring in outside air and cool it.