Note: ; Remote Keyless Entry; Warnings and Messages- Page 5

5

(Trip/Fuel):

Press this button to

display the following trip and fuel
information:
• Odometer
• Trip Odometers
• Fuel Range
• Average Economy
• Timer
• Fuel Used
• Average Speed

Warnings and Messages

The DIC provides a variety of vehicle
warning messages (depending on
optional equipment) if a problem is
sensed in a vehicle system. To
acknowledge a message and clear it
from the display, press any DIC button.
Some urgent messages cannot be
cleared from the DIC display. 
If you have a current OnStar subscrip-
tion, and a warning message appears,
you can press the OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can access
certain diagnostic information and can
tell you how serious the problem is and
what you should do about it.

See Section 3 of your Owner Manual. 

Note: 

Your vehicle’s warnings and

messages provide critical information
that can prevent damage to your vehi-
cle. Review your Owner Manual to
become familiar with the information
displayed and the action required.

Remote Keyless Entry

The Remote Keyless Entry (RKE) trans-
mitter allows you to lock and unlock your
vehicle and perform other functions
while up to approximately 195 feet away
from the vehicle. 
RKE functions include:

(Remote Vehicle Start)

(if equipped):

This feature can be used to start the
engine from outside the vehicle. (See
Remote Vehicle Start.)

(Lock):

Press this button to lock all

the doors. RKE feedback (light flash
and/or horn chirp) can be programmed
using the Driver Information Center
(DIC).

(Unlock):

Press this button to unlock

the driver’s door. Press it again within
five seconds to unlock all remaining
doors. RKE feedback (light flash) can be
programmed using the DIC.

(Power Liftgate)

(if equipped):

Press and hold this button until the lift-
gate starts moving to open and close
the liftgate. The taillamps will flash and a
chime will sound when the liftgate is
moving.

(Vehicle Locator/Panic Alarm):

Press and release this button to locate
your vehicle. The turn signal lamps will
flash and the horn will sound three
times.
Press and hold the button to activate the
panic alarm. The turn signal lamps will
flash and the horn will sound for 30
seconds. Press the button again or turn
the ignition to On to cancel the alarm.

See Section 2 of your Owner Manual.

SAFETY & SECURITY