Automatic Transmission Fluid; Vehicle Care; Automatic Transmission- Page 309

2010 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Vehicle Care

10-11

To reset the Engine Oil Life System:

1. Turn the ignition to ON/RUN,

with the engine off.

2. Press the vehicle information

button until OIL LIFE
REMAINING displays.

3. Press and hold the set/reset

button until 100% is displayed.
Three chimes sound and the
CHANGE ENGINE OIL SOON
message goes off.

4. Turn the key to LOCK/OFF.

If the CHANGE ENGINE OIL SOON
message comes back on when the
vehicle is started, the engine oil life
system has not reset. Repeat the
procedure.

What to Do with Used Oil

Used engine oil contains certain
elements that can be unhealthy for
your skin and could even cause
cancer. Do not let used oil stay on
your skin for very long. Clean your
skin and nails with soap and water,
or a good hand cleaner. Wash or
properly dispose of clothing or rags
containing used engine oil. See the
manufacturer's warnings about the
use and disposal of oil products.

Used oil can be a threat to the
environment. If you change your
own oil, be sure to drain all the oil
from the filter before disposal. Never
dispose of oil by putting it in the
trash, pouring it on the ground, into
sewers, or into streams or bodies of
water. Recycle it by taking it to a
place that collects used oil.

Automatic Transmission
Fluid

It is not necessary to check the
transmission fluid level.
A transmission fluid leak is the only
reason for fluid loss. If a leak
occurs, take the vehicle to the
dealer/retailer and have it repaired
as soon as possible.

Change the fluid at the intervals
listed in

Scheduled Maintenance on

page 11

2

and be sure to use the

transmission fluid listed in

Recommended Fluids and
Lubricants on page 11

7

.

Detailed Information for 2010 Buick enclave Owner Manual

Lists of information found in 2010 Buick enclave Owner Manual - Page 309

  • 1. Turn the ignition to ON/RUN, with the engine off.
  • 2. Press the vehicle information button until OIL LIFE REMAINING displays.
  • 3. Press and hold the set/reset button until 100% is displayed.
  • 4. Turn the key to LOCK/OFF.