Engine Air Cleaner/Filter; Vehicle Care; Use of the incorrect- Page 310

2010 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

10-12

Vehicle Care

Notice:

Use of the incorrect

automatic transmission fluid may
damage the vehicle, and the
damages may not be covered by
the vehicle's warranty. Always
use the automatic transmission
fluid listed in

Recommended

Fluids and Lubricants on
page 11

7

.

The transmission fluid will not reach
the end of the dipstick unless the
transmission is at operating
temperature. If you need to check
the transmission fluid level, please
take the vehicle to your dealer/
retailer.

Engine Air Cleaner/Filter

When to Inspect the Engine Air
Cleaner/Filter

Inspect the air cleaner/filter at the
Maintenance

II

intervals and replace

it at the first oil change after each
80 000 km (50,000 mile) interval.
See

Scheduled Maintenance on

page 11

2

for more information.

If you are driving in dusty/dirty
conditions, inspect the filter at each
engine oil change.

See

Engine Compartment Overview

on page 10

6

for the location of the

engine air cleaner/filter.

How to Inspect the Engine Air
Cleaner/Filter

To inspect the air cleaner/filter,
remove the filter from the vehicle
and lightly shake the filter (away
from vehicle) to release loose dust
and dirt. If the filter remains caked
with dirt, a new filter is required.

To inspect or replace the engine air
cleaner/filter:

1. Remove the engine cover. See

Engine Cover on page 10

7

.

A. Ventilation Tube

B. Sensor

2. Disconnect the cover fitting from

the ventilation tube (A).

3. Disconnect the wiring harness

connector from the sensor (B).

Detailed Information for 2010 Buick enclave Owner Manual

Lists of information found in 2010 Buick enclave Owner Manual - Page 310

  • 1. Remove the engine cover.
  • 2. Disconnect the cover fitting from the ventilation tube (A).
  • 3. Disconnect the wiring harness connector from the sensor (B).