Automatic Transmission Shift Lock Control System Check; Ignition Transmission Lock Check; Park Brake and P (Park) Mechanism Check- Page 324

2010 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

10-26

Vehicle Care

Automatic Transmission
Shift Lock Control
System Check

{

WARNING

When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.

1. Before starting this check, be

sure there is enough room
around the vehicle. It should be
parked on a level surface.

2. Firmly apply the parking brake.

See

Parking Brake on

page 9

27

.

Be ready to apply the regular
brake immediately if the vehicle
begins to move.

3. With the engine off, turn the

ignition to ON/RUN, but do not
start the engine. Without
applying the regular brake, try to
move the shift lever out of
P (Park) with normal effort. If the
shift lever moves out of P (Park),
contact your dealer/retailer for
service.

Ignition Transmission
Lock Check

While parked, and with the parking
brake set, try to turn the ignition to
LOCK/OFF in each shift lever
position.

.

The ignition should turn to
LOCK/OFF only when the shift
lever is in P (Park).

.

The ignition key should come
out only in LOCK/OFF.

Contact your dealer/retailer if
service is required.

Park Brake and P (Park)
Mechanism Check

{

WARNING

When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case it begins to
roll. Be ready to apply the regular
brake at once should the vehicle
begin to move.

Detailed Information for 2010 Buick enclave Owner Manual

Lists of information found in 2010 Buick enclave Owner Manual - Page 324

  • 1. Before starting this check, be sure there is enough room around the vehicle.
  • 2. Firmly apply the parking brake.
  • 3. With the engine off, turn the ignition to ON/RUN, but do not start the engine.