Memory Seats; Storing Memory Positions; Seats and Restraints- Page 50

2016 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9159225) - 2016 - crc - 7/31/15

Seats and Restraints

49

{

Warning

Sitting in a reclined position when
the vehicle is in motion can be
dangerous. Even when buckled
up, the safety belts cannot do
their job.

The shoulder belt will not be
against your body. Instead, it will
be in front of you. In a crash, you
could go into it, receiving neck or
other injuries.

The lap belt could go up over
your abdomen. The belt forces
would be there, not at your pelvic
bones. This could cause serious
internal injuries.

For proper protection when the
vehicle is in motion, have the
seatback upright. Then sit well
back in the seat and wear the
safety belt properly.

Do not have a seatback reclined if
the vehicle is moving.

Memory Seats

If available, the controls on the
driver door are used to program and
recall memory settings for the driver
seat, outside mirrors, and power
steering column (if equipped).

Storing Memory Positions

To save into memory:

1. Adjust the driver seat and

seatback recliner, both outside
mirrors, and the power steering
column (if equipped).

Not all vehicles will have the
ability to save and recall the
mirror positions.

2. Press and hold 1 until

two beeps sound.

3. Repeat for a second driver

position using 2.

To recall, press and release 1 or 2.
The vehicle must be in P (Park).
A single beep will sound. The seat,
outside mirrors, and power steering
column (if equipped) will move to
the positions previously stored for
the identified driver.

Detailed Information for 2016 Buick enclave Owner Manual

Lists of information found in 2016 Buick enclave Owner Manual - Page 50

  • 1. Adjust the driver seat and seatback recliner, both outside mirrors, and the power steering column (if equipped).
  • 2. Press and hold 1 until two beeps sound.
  • 3. Repeat for a second driver position using 2.
  • 2. The vehicle must be in P (Park).