Remote Vehicle Start; Battery Replacement; Keys, Doors, and Windows- Page 37

2018 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

10999311) - 2018 - crc - 11/20/17

36

Keys, Doors, and Windows

Battery Replacement

Replace the battery in the
transmitter soon if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC.

Caution

When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.

To replace the battery:

1. Insert a flat, thin object and

remove the back cover.

2. Lift the battery with a flat

object.

3. Remove the battery.

4. Insert the new battery, positive

side toward the back cover.
Replace with a CR2032 or
equivalent battery.

5. Push together the transmitter.

Remote Vehicle Start

If equipped, the vehicle has a
remote starting feature that starts
the engine from outside of the
vehicle.

/

:

If equipped, this button is on

the RKE transmitter.

Laws in some communities may
restrict the use of remote starters.
For example, some laws may
require a person using the remote
start to have the vehicle in view
when doing so. Check local
regulations for any requirements on
remote starting of vehicles.

Do not use the remote start feature
if the vehicle is low on fuel. The
vehicle could run out of fuel.

If the vehicle has the remote start
feature, the RKE transmitter range
may be less while the vehicle is
running.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE)
System

0

30

.

Detailed Information for 2018 Buick enclave Owner Manual

Lists of information found in 2018 Buick enclave Owner Manual - Page 37

  • 1. Insert a flat, thin object and remove the back cover.
  • 2. Lift the battery with a flat object.
  • 3. Remove the battery.
  • 4. Insert the new battery, positive side toward the back cover.
  • 5. Push together the transmitter.