Sun Visors; Automatic Reversal System; Remote Window Operation- Page 58

2018 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

10999311) - 2018 - crc - 11/20/17

Keys, Doors, and Windows

57

Automatic Reversal System
Override

{

Warning

If automatic reversal system
override is active, the window will
not reverse automatically. You or
others could be injured and the
window could be damaged.
Before using automatic reversal
system override, make sure that
all people and obstructions are
clear of the window path.

When the engine is on, override the
automatic reversal system by pulling
and holding the window switch if
conditions prevent it from closing.

Programming the Power
Windows

Programming may be necessary if
the vehicle battery has been
disconnected or discharged. If the
window is unable to express-up,
program each express-close
window:

1. Close all doors.

2. Turn the ignition on or to ACC/

ACCESSORY.

3. Partially open the window to be

programmed. Then close it and
continue to pull the switch
briefly after the window has
fully closed.

4. Open the window and continue

to press the switch briefly after
the window has fully opened.

Remote Window Operation

If equipped, this feature allows the
windows to be opened and closed
remotely. If enabled in vehicle
personalization, press and hold

Q

on the RKE transmitter to open the
windows or

K

to close the windows.

See

Vehicle Personalization

0

154

.

Sun Visors

Pull the sun visor down to block
glare. Detach the sun visor from the
center mount to pivot to the side
window and, if equipped, extend
along the rod.

Detailed Information for 2018 Buick enclave Owner Manual

Lists of information found in 2018 Buick enclave Owner Manual - Page 58

  • 1. Close all doors.
  • 2. Turn the ignition on or to ACC/ ACCESSORY.
  • 3. Partially open the window to be programmed.
  • 4. Open the window and continue to press the switch briefly after the window has fully opened.