Vehicle Care- Page 308

2020 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13527524) - 2020 - CRC - 9/5/19

Vehicle Care

307

5. Turn the wheel wrench

clockwise to raise the jack lift
head until the slots in the jack
head fit into the metal flange
behind the cut out on the
plastic molding. Do not raise
the vehicle yet.

6. Put the compact spare tire

near you.

7. Turn the wrench clockwise in

the jack to raise the vehicle.
Raise the vehicle far enough
off the ground so that there is
enough room for the spare tire
to fit under the wheel well.

8. Remove all of the wheel nuts.

9. Remove the flat tire.

{

Warning

Rust or dirt on a wheel, or on
the parts to which it is
fastened, can make wheel
nuts become loose after time.
The wheel could come off and
cause a crash. When
changing a wheel, remove any
rust or dirt from places where
the wheel attaches to the

(Continued)

Warning (Continued)

vehicle. In an emergency, a
cloth or a paper towel can be
used; however, use a scraper
or wire brush later to remove
all rust or dirt.

10. Remove any rust or dirt from

the wheel bolts, mounting
surfaces, and spare wheel.

11. Place the compact spare tire

on the wheel-mounting surface.

Detailed Information for 2020 Buick enclave Owner Manual

Lists of information found in 2020 Buick enclave Owner Manual - Page 308

  • 5. Turn the wheel wrench clockwise to raise the jack lift head until the slots in the jack head fit into the metal flange behind the cut out on the plastic molding.
  • 6. Put the compact spare tire near you.
  • 7. Turn the wrench clockwise in the jack to raise the vehicle.
  • 8. Remove all of the wheel nuts.
  • 9. Remove the flat tire.
  • 11. Place the compact spare tire on the wheel-mounting surface.