Tire Inspection; Vehicle Care- Page 358

2020 Buick Encore GX Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
09-Vehicle Care_en_US
Vehicle Care
background image

Buick Encore GX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

14018934) - 2020 - CRC - 2/27/20

Vehicle Care

357

There are two minutes to match the
first tire/wheel position, and
five minutes overall to match all four
tire/wheel positions. If it takes
longer, the matching process stops
and must be restarted.

The TPMS sensor matching
process is:

1. Set the parking brake.

2. Turn the ignition on without

starting the vehicle or place the
vehicle in Service Mode. See

Ignition Positions

0

236

.

3. Use SELECT or

o

/

p

to select

the Vehicle in the Base Level
Driver Information Center
(DIC). Or Use SELECT
or

o

/

p

to select the Info page

in the Uplevel Driver
Information Center (DIC).

4. Use the thumbwheel to scroll to

the Tire Pressure Learn Menu
Item (Base DIC) or the Tire
Pressure Menu Item screen
(Uplevel DIC).

5. Press and hold

l

or the

thumbwheel to begin the
sensor matching process.
A message requesting
acceptance of the process may
display.

6. If requested, press

l

or the

thumbwheel again to confirm
the selection. The horn sounds
twice to signal the receiver is in
relearn mode and the TIRE
LEARN or TIRE LEARNING
ACTIVE message displays on
the DIC screen.

7. Start with the driver side

front tire.

8. Place the relearn tool against

the tire sidewall, near the valve
stem. Then press the button to
activate the TPMS sensor.
A horn chirp confirms that the
sensor identification code has
been matched to this tire and
wheel position.

9. Proceed to the passenger side

front tire, and repeat the
procedure in Step 8.

10. Proceed to the passenger side

rear tire, and repeat the
procedure in Step 8.

11. Proceed to the driver side rear

tire, and repeat the procedure
in Step 8. The horn sounds two
times to indicate the sensor
identification code has been
matched to the driver side rear
tire, and the TPMS sensor
matching process is no longer
active. The TIRE LEARN or
TIRE LEARNING ACTIVE
message on the DIC display
screen goes off.

12. Turn the vehicle off.

13. Set all four tires to the

recommended air pressure
level as indicated on the Tire
and Loading Information label.

Tire Inspection

We recommend that the tires,
including the spare tire, if the
vehicle has one, be inspected
for signs of wear or damage at
least once a month.

Detailed Information for 2020 Buick Encore GX Owner Manual

Lists of information found in 2020 Buick Encore GX Owner Manual - Page 358

  • 1. Set the parking brake.
  • 2. Turn the ignition on without starting the vehicle or place the vehicle in Service Mode.
  • 3. Use SELECT or o / p to select the Vehicle in the Base Level Driver Information Center (DIC).
  • 4. Use the thumbwheel to scroll to the Tire Pressure Learn Menu Item (Base DIC) or the Tire Pressure Menu Item screen (Uplevel DIC).
  • 5. Press and hold l or the thumbwheel to begin the sensor matching process.
  • 6. If requested, press l or the thumbwheel again to confirm the selection.
  • 7. Start with the driver side front tire.
  • 8. Place the relearn tool against the tire sidewall, near the valve stem.
  • 9. Proceed to the passenger side front tire, and repeat the procedure in Step 8.
  • 8. 11.
  • 8. The horn sounds two times to indicate the sensor identification code has been matched to the driver side rear tire, and the TPMS sensor matching process is no longer active.
  • 12. Turn the vehicle off.
  • 13. Set all four tires to the recommended air pressure level as indicated on the Tire and Loading Information label.

Related Documents for 2020 Buick Encore GX Owner Manual