Buick Encore GX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
15481080) - 2022 - CRC - 6/1/21
40
Seats and Restraints
not sound indicating memory position
were not saved. Repeat Steps 3 and 4 to
try again.
5. Repeat Steps 1
–
4 for the other RKE
transmitter 1 or 2 using the other 1 or
2 memory button.
It is recommended to save the preferred
driving positions to both 1 and 2 if you are
the only driver.
To save the common exit seating position to
B
that is used by all drivers for Manually
Recalling Seating Positions and Auto Seat
Exit Memory Recall features, repeat
Steps 1
–
4 using
B
, the exit button.
Manually Recalling Seating Positions
Press and hold 1, 2, or
B
button until the
recall is complete, to recall the positions
previously saved to that button.
Manual Memory recall movement for 1, 2 or
B
buttons may be initiated and will
complete to the saved memory position if
the vehicle is in or out of P (Park).
Enable Automatic Recalls under Vehicle
Personalization Settings
.
For Seat Entry Memory that begins
movement to the preferred driving
position of the 1 or 2 button when the
vehicle is turned on, select the Settings
menu, then Vehicle, then Seating Position,
then Seat Entry Memory, and then Select
ON or OFF. See
“
Auto Seat Entry Memory
Recall
”
later in this section.
.
For Seat Exit Memory that begins
movement to the preferred exit position
of the
B
button when the vehicle is
turned off and the driver door is open or
opened, select the Settings menu, then
Vehicle, then Seating Position, then Seat
Exit Memory, and then Select ON or OFF.
See
“
Auto Seat Exit Memory Recall
”
later
in this section.
.
See
for
additional setting information.
Auto Seat Entry Memory Recall
Seat Entry Memory will automatically begin
movement to the seating positions of the 1
or 2 button corresponding to the driver
’
s
RKE Transmitter number 1 or 2 detected by
the vehicle when:
.
The vehicle is turned ON.
.
Seating positions have been previously
saved to the same 1 or 2 button. See
“
Saving Seating Positions
”
previously in
this section.
.
Seat Entry Memory is enabled. See
“
Enable Automatic Recalls
”
under
“
Vehicle
Personalization Settings
”
previously in this
section.
.
The shift lever is in P (Park).
Seat Entry Memory Recall will continue if
the vehicle is shifted out of P (Park) prior to
reaching the saved memory position.
If the saved memory seat position does not
automatically recall, verify the recall is
enabled. See
“
Enable Automatic Recalls
”
under
“
Vehicle Personalization Settings
”
previously in this section.
If the memory seat recalls to the wrong
position, the driver
’
s RKE transmitter number
1 or 2 may not match the memory button
number positions they were saved to. Try
the other RKE transmitter or try saving the
positions to the other 1 or 2 memory
button. See
“
Saving Seating Positions
”
previously in this section.