4
REMOTE VEHICLE START
F
With the vehicle parked, push down the lever on the left side of the steering column to
adjust the steering wheel. The steering wheel can then be moved up or down and in or
out. Pull up the lever to lock the steering wheel in place.
See Instruments and Controls in your Owner's Manual.
F
Optional equipment
TILT/TELESCOPE STEERING WHEEL
KEYLESS ACCESS SYSTEM
Use Remote Vehicle Start to start the engine from outside the vehicle. During a remote start,
the engine will run for 15 minutes.
Press and release the
Lock
button and then press and hold the
Remote Start
button until the turn signal lamps flash. After entering the vehicle, turn on the ignition.
Press and hold the
button until the parking lamps turn off to cancel a remote start.
Note:
To change the remote start settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner's Manual.
Keyless Access enables operation of the doors, liftgate and ignition without removing the
Remote Keyless Entry transmitter from a pocket or purse. The transmitter must be within 3 feet
of the door to be unlocked or within 3 feet of the liftgate.
Keyless Unlocking
With the transmitter within range:
Press the lock button on the driver’s door
handle to unlock the driver’s door; press it
again within 5 seconds to unlock all doors
and the liftgate.
Press the lock button on the passenger’s door
handle to unlock all doors and the liftgate.
Press the touchpad on the liftgate handle to
open the liftgate.
Keyless Locking
With the ignition off, the transmitter out of the vehicle, and all doors closed:
Press the lock button on any door handle to lock all doors and the liftgate immediately.
If Passive Locking is turned on, all doors and the liftgate will lock automatically after a
short delay once all doors and the liftgate are closed.
Note:
To change the door lock settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner's Manual.