CRUISE CONTROL- Page 16

16

F

Optional equipment

CRUISE CONTROL

Setting Cruise Control

1. Press the   

On/Off

 button. The   Cruise Control symbol will illuminate in white on the 

instrument cluster.

2. When traveling at the desired speed, press the switch down to the 

SET- 

position to set 

the speed. The   symbol will illuminate in green on the instrument cluster.

Adjusting Cruise Control

RES+ Resume/Accelerate

Press up to resume a set speed. When the 

system is active, press up to increase speed.

SET– Set/Coast

When the system is active, press down to 

decrease speed.

Cancel 

Press to cancel the cruise control without erasing the set speed from memory. Pressing the 

brake pedal will also cancel the cruise control.
The set speed is erased when cruise control or the vehicle ignition is turned off.

Adaptive Cruise Control

F

The system maintains the set speed and a following gap — the time between your vehicle 

and a vehicle detected directly ahead — by accelerating or braking automatically while you 

continue to steer.

  Press the 

 Following Gap

 button to select a following gap setting of Far, Medium, or 

Near. This is also the Forward Collision Alert

F

 setting.

  Press and hold the 

Cancel

 button to switch between   regular cruise control and 

 Adaptive Cruise Control.

See Driving and Operating in your Owner’s Manual. 

AUTOMATIC TRANSMISSION  

Driver Shift Control

Driver Shift Control is a manual mode that 

allows the driver to shift gears manually. This 

feature can be used to limit the top gear and 

vehicle speed or to downshift when driving on 

a downhill grade to provide engine braking. 
1. Move the shift lever to the L (Low) position. 
2. Press the 

+

 (plus) or 

–

 (minus) button on 

the shift lever to upshift or downshift. The 

current gear will be displayed on the Driver Information Center. 

If vehicle speed is too high or too low for the requested gear, the shift will not occur.

See Driving and Operating in your Owner’s Manual.