Vehicle Care; Front Wiper Blade; Rear Wiper Blade Replacement- Page 267

2019 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
background image

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

12032235) - 2019 - CRC - 6/27/18

266

Vehicle Care

Caution

Allowing the wiper arm to touch
the windshield when no wiper
blade is installed could damage
the windshield. Any damage that
occurs would not be covered by
the vehicle warranty. Do not allow
the wiper arm to touch the
windshield.

Front Wiper Blade
Replacement

To replace the front wiper blades:

1. Pull the windshield wiper

assembly away from the
windshield.

2. Lift up on the latch in the

middle of the wiper blade
where the wiper arm attaches.

3. With the latch open, pull the

wiper blade down toward the
windshield far enough to
release it from the J-hooked
end of the wiper arm.

4. Remove the wiper blade.

5. Reverse Steps 1

ā€“

3 for wiper

blade replacement.

Caution

Damage may occur if the wiper
blades are not in contact with the
windshield before turning on the
wiper system.

Rear Wiper Blade Replacement

To replace the rear wiper blade:

1. Slide a plastic tool under the

cover and push upward to
unsnap.

2. Slide the cover toward the

wiper blade tip to unhook it
from the blade assembly.

3. Remove the cover.

4. Lift the wiper arm away from

the windshield.

Detailed Information for 2019 Buick Envision Owner Manual

Lists of information found in 2019 Buick Envision Owner Manual - Page 267

  • 1. Pull the windshield wiper assembly away from the windshield.
  • 2. Lift up on the latch in the middle of the wiper blade where the wiper arm attaches.
  • 3. With the latch open, pull the wiper blade down toward the windshield far enough to release it from the J-hooked end of the wiper arm.
  • 4. Remove the wiper blade.
  • 5. Reverse Steps 1 ā€“ 3 for wiper blade replacement.
  • 1. Slide a plastic tool under the cover and push upward to unsnap.
  • 2. Slide the cover toward the wiper blade tip to unhook it from the blade assembly.
  • 3. Remove the cover.
  • 4. Lift the wiper arm away from the windshield.