Identifying Driver Number; Saving Memory Positions; Manually Recalling Memory- Page 60

2019 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

01-In Brief_en_US
03-Seats and Restraints_en_US
05-Instruments and Controls_en_US
09-Driving and Operating_en_US
10-Vehicle Care_en_US
background image

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

12032235) - 2019 - CRC - 6/27/18

Seats and Restraints

59

and then Easy Exit Options.
Select On or Off. See

Easy Exit

Recall

later in this section.

.

See

Vehicle Personalization

0

150

for additional setting

information.

Identifying Driver Number

To identify the driver number:

1. Start the vehicle with a different

key or RKE transmitter. The
DIC should display the driver
number; 1 or 2. Turn the
ignition off and remove the key
or RKE transmitter from the
vehicle.

2. Start the vehicle with the initial

key or RKE transmitter. The
DIC should display the other
driver number not shown in
Step 1.

Saving Memory Positions

Read these instructions completely
before saving memory positions.

To save preferred driving positions
1 and 2:

1. Turn the ignition on or to ACC/

ACCESSORY.

A DIC welcome message may
indicate driver number 1 or 2.

2. Adjust all available memory

features to the desired driving
position.

3. Press and release SET; a beep

will sound.

4. Immediately press and hold the

1 or 2 memory button matching
the above DIC welcome
message until two beeps
sound.

If too much time passes
between releasing SET and
pressing 1, the memory
position will not be saved and
two beeps will not sound.
Repeat Steps 3 and 4.

1 or 2 corresponds to the

driver number. See

Identifying

Driver Number

previously in

this section.

5. Repeat Steps 1

4 for a second

driver using 1 or 2.

To save the position for

B

and

easy exit features, repeat Steps 1

4

using

B

. This saves the position

for getting out of the vehicle.

Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.

Manually Recalling Memory
Positions

Press and hold 1, 2, or

B

to recall

the previously saved memory
positions.

To stop Manual Memory Recall
movement, release 1, 2, or

B

or

press any of the following controls:

.

Power seat

.

Memory SET, 1, 2, or

B

.

Power mirror, with the driver or
passenger side mirror selected

.

Power steering wheel

Detailed Information for 2019 Buick Envision Owner Manual

Lists of information found in 2019 Buick Envision Owner Manual - Page 60

  • 1. Start the vehicle with a different key or RKE transmitter.
  • 2. Turn the ignition off and remove the key or RKE transmitter from the vehicle.
  • 2. Start the vehicle with the initial key or RKE transmitter.
  • 1. Saving Memory Positions Read these instructions completely before saving memory positions.
  • 1. Turn the ignition on or to ACC/ ACCESSORY.
  • 2. 2.
  • 3. Press and release SET; a beep will sound.
  • 4. Immediately press and hold the 1 or 2 memory button matching the above DIC welcome message until two beeps sound.
  • 4. • 1 or 2 corresponds to the driver number.
  • 5. Repeat Steps 1 – 4 for a second driver using 1 or 2.
  • 1 or 2 corresponds to the driver number.