ELECTRIC PARKING BRAKE - Page 15

15

LIGHTING

F

Optional equipment

Exterior Lamps

Rotate the knob to activate the  

exterior lamps.

 Off/On

AUTO Automatic Headlamp System 

Automatically activates the Daytime Running 

Lamps (DRLs) or the headlamps and other 

exterior lamps depending on outside light 

conditions.

 Parking Lamps

 Headlamps

 Fog Lamps 

Press to turn the fog lamps on or off.

IntelliBeam System

F

The IntelliBeam system automatically turns the high-beam headlamps on/off based on traffic 

conditions. A green 

indicator displays on the instrument cluster when the  system is on; 

a blue 

indicator displays when the high-beam headlamps are on.

  Turn the lamp control to the AUTO position to turn the automatic high-beam  system on.
  Using the high/low-beam changer on the turn signal lever disables the IntelliBeam sys-

tem. Activate the high/low-beam changer twice in 2 seconds to enable the system again.

Note: 

IntelliBeam activates the high-beam headlamps only when driving over 25 mph. 

Instrument Panel Lighting

  Rotate and hold the   thumbwheel to adjust the instrument panel lighting.

See Lighting in your Owner’s Manual.

ELECTRIC PARKING BRAKE     

  To apply the parking brake, pull the  

Parking Brake

 switch.

  To release the parking brake, turn on the 

ignition, press the brake pedal, and then 

press the 

switch.

Note: 

The parking brake will release automatically 

if the vehicle is running, placed into gear and an 

attempt is made to drive.

See Driving and Operating in your Owner’s Manual.