Vehicle Care- Page 314
2010 Buick LaCrosse Owner Manual
9-32
Vehicle Care
Base
Up-Level
7. Locate the vertical headlamp
aiming screws, which are under
the hood near each headlamp
assembly.
The adjustment screw can be
turned with a E8 Torx
®
socket.
8. Turn the vertical aiming screw
until the headlamp beam is
aimed to the horizontal tape line.
Turn it clockwise or
counterclockwise to raise or
lower the angle of the beam.
9. Make sure that the light from the
headlamp is positioned at the
bottom edge of the horizontal
tape line. The lamp on the
left (A) shows the correct
headlamp aim. The lamp on the
right (B) shows the incorrect
headlamp aim.
10. Repeat Steps 7 through 9 for
the opposite headlamp.
Detailed Information for 2010 Buick LaCrosse Owner Manual
Lists of information found in 2010 Buick LaCrosse Owner Manual - Page 314
- 7. Locate the vertical headlamp aiming screws, which are under the hood near each headlamp assembly.
- 8. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line.
- 9. Make sure that the light from the headlamp is positioned at the bottom edge of the horizontal tape line.
Related Documents for 2010 Buick LaCrosse Owner Manual
All trademarks are property of their respective owners. Tightrope
Interactive