Starting Procedure; Driving and Operating; Cranking the engine for- Page 272

2011 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (22,1)

Buick LaCrosse Owner Manual - 2011

9-22

Driving and Operating

Starting Procedure
(Keyless Access)

1. If the vehicle has the keyless

access system, the transmitter
must be in the vehicle. Put
your foot on the brake pedal
and push the START button.
When the engine begins
cranking, let go of the button.

The idle speed will go down
as your engine gets warm.
Do not race the engine
immediately after starting it.
Operate the engine and
transmission gently to allow
the oil to warm up and lubricate
all moving parts.

If the transmitter is not in
the vehicle or something is
interfering with the transmitter,
the Driver Information Center

(DIC) will display NO REMOTE
DETECTED. See

Driver

Information Center (DIC) on
page 5

25

for more information.

If the battery in the keyless
access transmitter needs
replacing, the DIC displays
REPLACE BATTERY IN
REMOTE KEY. The vehicle
can still be driven. See

Starting

the Vehicle with a Low
Transmitter Battery

in

Remote

Keyless Entry (RKE) System
Operation on page 2

4

for

more information.

The vehicle has a
Computer-Controlled Cranking
System. This feature assists
in starting the engine and
protects components. If the
START button is pressed, and
then released when the engine

begins cranking, the engine
will continue cranking for a few
seconds or until the vehicle
starts. If the engine does not
start and the button is pressed
for many seconds, cranking will
be stopped after 15 seconds to
prevent cranking motor damage.
To prevent gear damage, this
system also prevents cranking
if the engine is already running.
Engine cranking can be stopped
by pressing the START button a
second time.

Notice:

Cranking the engine for

long periods of time, by returning
the key to the START position
immediately after cranking has
ended, can overheat and damage
the cranking motor, and drain the
battery. Wait at least 15 seconds
between each try, to let the
cranking motor cool down.