Remote Vehicle Start; Keys, Doors, and Windows; Starting the Engine Using Remote- Page 35

2018 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Buick LaCrosse Owner Manual (GMNA-Localizing-U.S./Canada-10999169) -

2018 - crc - 3/28/17

34

Keys, Doors, and Windows

2. Insert a flat tool into the bottom

of the transmitter and separate
the transmitter into two halves.

3. Remove the battery by pushing

on the battery and sliding it
toward the bottom of the
transmitter.

5. Insert the new battery, positive

side facing up. Push the
battery down until it is held in
place. Replace with a CR2032
or equivalent battery.

6. Snap the battery cover back on

to the transmitter.

Remote Vehicle Start

If equipped, this feature allows the
engine to be started from outside
the vehicle.

The

/

button will be on the RKE

transmitter if the vehicle has remote
start.

Laws in some local communities
may restrict the use of remote
starters. For example, some laws
may require a person using remote
start to have the vehicle in view.
Check local regulations for any
requirements.

Starting the Engine Using Remote
Start

To start the engine using the remote
start feature:

1. Aim the RKE transmitter at the

vehicle.

2. Press and release

Q

.

3. Immediately after completing

Step 2, press and hold

/

for at

least four seconds or until the
turn signal lamps flash. The
turn signal lamps flashing
confirms the request to remote
start the vehicle has been
received.

When the engine starts, the
parking lamps will turn on and
remain on as long as the

Detailed Information for 2018 Buick LaCrosse Owner Manual

Lists of information found in 2018 Buick LaCrosse Owner Manual - Page 35

  • 2. Insert a flat tool into the bottom of the transmitter and separate the transmitter into two halves.
  • 3. Remove the battery by pushing on the battery and sliding it toward the bottom of the transmitter.
  • 5. Insert the new battery, positive side facing up.
  • 6. Snap the battery cover back on to the transmitter.
  • 1. Aim the RKE transmitter at the vehicle.
  • 2. Press and release Q .
  • 3. Immediately after completing Step 2, press and hold / for at least four seconds or until the turn signal lamps flash.