Windshield Washer Fluid; Adding Washer Fluid; How to Check Power Steering Fluid- Page 262

yellow

blue     

6-26

How to Check Power Steering Fluid

When the engine compartment is cool, wipe the cap and
the top of the reservoir clean, then unscrew the cap and
wipe the dipstick with a clean rag. Replace the cap and
completely tighten it. Then remove the cap again and
look at the fluid level on the dipstick.

The level should be at the FULL COLD mark. If
necessary, add only enough fluid to bring the level up to
the mark.

What to Use

To determine what kind of fluid to use, see
“Recommended Fluids and Lubricants” in the Index.
Always use the proper fluid. Failure to use the proper
fluid can cause leaks and damage hoses and seals.

Windshield Washer Fluid

What to Use

When you need windshield washer fluid, be sure to read
the manufacturer’s instructions before use. If you will be
operating your vehicle in an area where the temperature
may fall below freezing, use a fluid that has sufficient
protection against freezing.

Adding Washer Fluid

Open the cap labeled WASHER FLUID ONLY. Add
washer fluid until the tank is full.