Front Turn Signal; Cornering Lamps- Page 272

yellow

blue     

6-36

H–46–0860–X

1. Turn the horizontal

aiming screw (A) until
the indicator (C) is lined
up with zero.

A. Horizontal Aiming

Screw

C. Indicator

H–46–0862–X

B. Vertical Aiming Screw

D. Level Bubble

2. Turn the vertical aiming screw (B) until the level

bubble (D) is lined up with zero.

Front Turn Signal

The front turn signal bulbs can be accessed from under
the front of the vehicle. Reach up from under the vehicle
and, while pushing in the tab on the bulb assembly, turn
the assembly counterclockwise and remove. Remove the
old bulb by pulling it straight out of the retainer. Replace
the bulb and turn the bulb assembly back into place.

Cornering Lamps

Follow the same procedure as used for replacing the
headlamps. However, to remove the cornering lamp
bulb, turn the bulb assembly counterclockwise and pull
the bulb straight out.