Rear Turn Signals- Page 275

yellow

blue     

6-39

5. Replace the bulb and reverse the steps to install the

new bulb assembly.

Rear Turn Signals

1. Open the trunk. Turn the screw located just inside of

the trunk counterclockwise and remove.

2. Pull the carpet away from the rear area to access the

turn signal bulb assembly.

3. Turn the bulb socket one

-

quarter turn

counterclockwise, while pressing it firmly.

4. Pull the bulb socket straight out of the assembly.

5. Remove the old bulb by pulling it straight out.

6. Replace with a new bulb by pushing the bulb straight

into the socket until the bulb clicks into place.

7. Turn the bulb socket one

-

quarter turn into the

assembly to lock it back into place.

8. Reverse Steps 1 through 3 to reinstall the 

bulb assembly.