Delayed Locking (If Equipped)- Page 62

yellow

blue     

2-6

Use the following procedure to change modes:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the driver’s power door

lock switch through Step 4.

3. Press the LOCK button on the remote keyless entry

transmitter. The automatic door locks will remain in
the current mode.

4. Press the LOCK button on the transmitter again.

Each time the transmitter’s LOCK button is 
pressed, the mode will advance by one, going from 
3 to 0 to 1, etc.

Note: The door locks will cycle according to the
mode entered while customizing the memory door
locks. (Mode “0” has no feedback.)

5. Release the power door lock switch. The automatic

door locks will remain in the most recent 
mode selected.

Delayed Locking (If Equipped)

This feature lets the driver delay the actual locking of
the vehicle. When the power door lock switch is pressed
with the key removed from the ignition and the driver’s
door open, a chime will sound three times to signal that
delayed locking is active. When all doors have been
closed, the doors will lock automatically after five
seconds. If any door is opened before this, the
five

-

second timer will reset itself once all the doors have

been closed again.

Pressing the door lock switch twice within two seconds
will override this feature.