Personal Choice Programming- Page 105

yellow

blue     

2-48

Personal Choice Programming

This feature can be programmed in the on or off mode
for each transmitter. Vehicles are delivered with this
feature on.

To turn the feature off:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

throughout this procedure. All the doors will lock.

3. Press the instant alarm on the transmitter. Perimeter

lighting remains on at this time and the horn will
chirp two times.

4. Press the instant alarm on the transmitter again.

Perimeter lighting is disabled and the horn will chirp
one time.

5. Release the door lock switch. The perimeter lighting

feature is now off.

To turn the feature on:

1. Close all the doors and turn the ignition on. Keep all

doors closed throughout this procedure.

2. Press and hold LOCK on the power door lock switch

throughout this procedure. All the doors will lock.

3. Press the instant alarm on the transmitter. Perimeter

lighting is now remains off at this time and the horn
will chirp one time.

4. Press the instant alarm on the transmitter again.

Perimeter lighting is now enabled and the horn will
chirp two times.

5. Release the door lock switch. The perimeter lighting

feature is now on.

This procedure only changes the mode for the
transmitter used to change this setting. The procedure
will need to be repeated for the second transmitter.

If your vehicle is equipped with the Driver Information
Center (DIC), you must program this feature through 
the DIC. See “Driver Information Center” in the Index.