Rear Turn Signal/Stoplamp- Page 298

yellow

blue     

6-40

Rear Turn Signal/Stoplamp

1. Open the trunk. On either side of the rear of the

trunk is a plastic retainer that holds the cargo net and
taillamp assembly in place.

2. Unhook the cargo net

from the cargo net
retainer and remove the
retainer by turning it
counterclockwise.

3. Remove the plastic

retaining screws on the
trunk’s interior.

4. Pull back the trunk trim panel.

5. Beneath the trim panel are three nuts that secure the

taillamp assembly. Remove these nuts with a 10 mm
wrench. Remove the nuts from only the side you
want to access. The turn signal and a stoplamp can
now be accessed.