Automatic Transaxle Operation; To Use the Engine Coolant Heater; Plugging the cord into an ungrounded outlet- Page 82

yellow

blue     

2-24

To Use the Engine Coolant Heater

1. Turn off the engine.

2. Open the hood and unwrap the electrical cord.

3. Plug it into a normal, grounded 110

-

volt AC outlet.

CAUTION:

Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the wrong
kind of extension cord could overheat and cause
a fire. You could be seriously injured. Plug the
cord into a properly grounded three

-

prong

110

-

volt AC outlet. If the cord won’t reach, use a

heavy

-

duty three

-

prong extension cord rated for

at least 15 amps.

4. Before starting the engine, be sure to unplug 

and store the cord as it was before to keep it away
from moving engine parts. If you don’t, it could 
be damaged.

How long should you keep the coolant heater plugged
in? The answer depends on the outside temperature, the
kind of oil you have, and some other things. Instead of
trying to list everything here, we ask that you contact
your dealer in the area where you’ll be parking your
vehicle. The dealer can give you the best advice for that
particular area.

Automatic Transaxle Operation

Your automatic transaxle has a shift lever located on the
steering column.

There are several different positions for your shift lever.

PARK (P): This locks your front wheels. It’s the best
position to use when you start your engine because your
vehicle can’t move easily.