Note to Canadian Owners:; Operating the Universal Transmitter- Page 124

yellow

blue     

2-66

Note to Canadian Owners: During programming, the
hand

-

held transmitter may automatically stop

transmitting after one or two seconds. In this case, you
should press and re

-

press the button on the hand

-

held

transmitter every two seconds without ever releasing the
button on the Universal Transmitter. Release both
buttons when the indicator light on the Universal
Transmitter begins to flash rapidly.

Operating the Universal Transmitter

Press and release the appropriate button on the Universal
Transmitter. The indicator light comes on while the
signal is being transmitted.

If the hand

-

held transmitter appears to program the

Universal Transmitter but does not open your garage
door, and if the garage door opener was manufactured
after 1996, the garage door opener may have a “rolling
code” system. A rolling code system changes the code
of the garage door opener every time you open or close
the garage door.

To determine if you have this system, press the button
on the Universal Transmitter that you have programmed
already. If the indicator light on the Universal
Transmitter flashes rapidly for one or two seconds and
then turns solid, the garage door opener has a rolling
code system. In a rolling code system, the garage 
door motor head unit must be trained to the 
Universal Transmitter.

“Rolling Code” Programming
(If Equipped)

If you have not previously programmed the hand

-

held

transmitter to the Universal Transmitter, see
“Programming the Universal Transmitter” listed
previously. If you have completed this programming
already, you now need to train the garage door opener
motor head unit to recognize the Universal Transmitter.
Refer to your garage door opener owner’s manual for
the proper transmitter training procedure for your garage
door opener brand.

1. Find the training button on the garage door opener

motor head unit. The exact location and color of the
button may vary by garage door opener brand. If you
have difficulty finding the training button, refer to
your garage door opener owner’s manual.