Bulb Replacement- Page 294

yellow

blue     

6-36

3. Remove the bulb socket

by turning it one

-

quarter

of a turn
counterclockwise, while
pressing it firmly, then
pull it out. You can use
pliers to remove the bulb
socket if you are unable
to do it by hand.

4. Remove the wire connector from the bulb by lifting

the lock tab and pulling it away from the 
plastic base.

5. Reverse the above steps to reassemble the 

lamp assembly.

When reassembling the lamp, make sure to align the
pin at the outboard edge of the headlamp assembly 
to the plastic retainer at the outboard edge of 
the vehicle.