Rearview Mirror Reading Lamps; Dome Lamp (If Equipped)- Page 107

yellow

blue     

2-47

You may enable or disable the perimeter lighting feature
when the driver performs the following sequence with
the engine not running, the doors closed and the ignition
key in RUN:

1. Apply your brakes.

2. Press and hold the power door lock switch. While

holding the door lock switch press and release the
remote alarm button on the remote keyless entry
transmitter. This will initialize the customization
mode. While in the customization mode, the feature
will sound the number of chimes corresponding to
the current mode: In Mode 1, one chime means the
feature is disabled. In Mode 2, two chimes signal
that the perimeter lighting feature is enabled. Each
additional press will advance the mode by one,
starting from the current mode. During this
procedure, the feature will sound the number of
chimes corresponding to the mode. When the lock
switch is released, the vehicle will remain in the 
last mode.

Disconnecting the vehicle’s battery for up to a year will
not change the programmed operation of this feature.

Rearview Mirror Reading Lamps

Use the switch next to each lamp to turn them on 
and off.

Dome Lamp (If Equipped)

The dome lamp will come on when you open the doors.