PREV (1):; NEXT (2):; SIDE (5):- Page 154

yellow

blue     

3-16

Your tape bias is set automatically.

If E and a number appear on the radio display, the tape
won’t play because of an error.

D

E10: The tape is tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub
counterclockwise with a pencil. Turn the tape over and
repeat. If the hubs do not turn easily, your tape may be
damaged and should not be used in the player. Try a
new tape to make sure your player is working properly.

D

E11: The tape is broken. Try a new tape.

If any error occurs repeatedly or if an error can’t be
corrected, please contact your dealer. If your radio
displays an error number, write it down and provide it to
your dealer when reporting the problem.

PREV (1): Press this button to search for the previous
selection on the tape. Your tape must have at least three
seconds of silence between each selection for PREV to
work. The sound will mute while seeking.

NEXT (2): Press this button to search for the next
selection on the tape. Your tape must have at least three
seconds of silence between each selection for NEXT to
work. The sound will mute while seeking.

The SEEK down and up arrows will also find the
previous and next selections on the tape.

AA

 (3): Press this button to reverse the tape rapidly.

Press it again to return to playing speed. The radio will
play while the tape reverses.

""

 (4): Press this button to advance quickly to 

another part of the tape. Press the button again to 
return to playing speed. The radio will play while the
tape advances.

SIDE (5): Press this button to change the side of the
tape that is playing.

RAND (6): Press this button to reduce background
noise. The double

-

D symbol will appear in the display.

Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double

-

D symbol are trademarks of Dolby

Laboratories Licensing Corporation.

SOURCE: Press this button to change to the tape or
disc function when the radio is on. If both a tape and a
disc are installed, the system will first go to tape play;
TAPE SIDE and an arrow will appear on the display. If
SOURCE is pressed again, the system will go to disc
play; CD PLAY will appear on the display.

EJECT: The system has two EJECT buttons. Press the
button near the CD slot to remove a disc. Press the
button near the tape slot to remove a tape and the radio
will play.