Cleaning the Inside of Your Vehicle; Cleaning of Fabric/Carpet; Using Multi-Purpose Interior Cleaner - Page 296

1999 Buick regal User Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

yellow

blue     

6-56

Don’t use any of these unless this manual says you can.
In many uses, these will damage your vehicle:

D

Alcohol

D

Laundry Soap

D

Bleach

D

Reducing Agents

Cleaning the Inside of Your Vehicle

Use a vacuum cleaner often to get rid of dust and loose
dirt. Wipe vinyl, leather, plastic and painted surfaces
with a clean, damp cloth.

Cleaning of Fabric/Carpet

Your dealer has two cleaners, Multi

-

Purpose Interior

Cleaner and Capture Non

-

Solvent Dry Spot and Soil

Remover for cleaning fabric and carpet. They will clean
normal spots and stains very well. You can get
GM

-

approved cleaning products from your dealer. (See

“Appearance Care and Materials” in the Index.)

Here are some cleaning tips:

D

Always read the instructions on the cleaner label.

D

Clean up stains as soon as you can 

--

 before they set.

D

Carefully scrape off any excess stain.

D

Use a clean cloth or sponge, and change to a 
clean area often. A soft brush may be used if stains
are stubborn.

D

If a ring forms on fabric after spot cleaning, clean the
entire area immediately or it will set.

Using Multi-Purpose Interior Cleaner 
on Fabric

1. Vacuum and brush the area to remove any loose dirt.

2. Always clean a whole trim panel or section. Mask

surrounding trim along stitch or welt lines.

3. Mix powdered cleaner following the directions on

the container label to form thick suds.

4. Use suds only and apply with a clean sponge. Don’t

saturate the material and don’t rub it roughly.

5. As soon as you’ve cleaned the section, use a sponge

to remove the suds.

6. Wipe cleaned area with a clean, damp towel or cloth.

7. Wipe with a clean cloth and let dry.

Detailed Information for 1999 Buick regal User Manual

Lists of information found in 1999 Buick regal User Manual - Page 296

  • 1. Vacuum and brush the area to remove any loose dirt.
  • 2. Always clean a whole trim panel or section.
  • 3. Mix powdered cleaner following the directions on the container label to form thick suds.
  • 4. Use suds only and apply with a clean sponge.
  • 5. As soon as you’ve cleaned the section, use a sponge to remove the suds.
  • 6. Wipe cleaned area with a clean, damp towel or cloth.
  • 7. Wipe with a clean cloth and let dry.