Rear-Door Child Security Locks- Page 66

yellow

blue     

2-6

The operating mode of the Programmable Automatic
Power Door Locks will be changed when the driver
performs the following sequence with the engine not
running, the doors closed and the ignition key in RUN:

1. Apply your regular brakes.

2. Press and hold the power door lock switch. While

holding the door lock switch, move the shift lever
out of and back into PARK (P).

After an initial transaxle cycle, each additional cycle
will advance the operating mode by one, starting from
the current operating mode. During this procedure, the
automatic door lock and unlock functions will operate as
defined by each mode above, providing the driver with
feedback of the current operating mode. If cycled
beyond Mode 4, the vehicle will enter operating Mode
1. When the door lock switch is released, the vehicle
will remain in the most recent operating mode.

Disconnecting the vehicle’s battery for up to a year will
not change the programmed mode of the Programmable
Automatic Power Door Locks.

Rear-Door Child Security Locks

Your vehicle is equipped with rear

-

door child security

locks that help prevent passengers from opening the rear
doors of your vehicle from the inside. To use one of
these locks:

1. Open one of the rear doors.