Matching Transmitter(s) To Your Vehicle- Page 73

yellow

blue     

2-13

To replace the battery:

1. Insert a flat object like a dime into the slot on the

back of the transmitter. Gently pry apart the front
and back.

2. Remove the old battery and replace it with the new

one. (Use type CR2032 or an equivalent.) Make sure
the positive (+) side of the battery is facing down.
Do not use a metal object to remove the old battery.

3. Snap the top and bottom together, making sure the

halves are together tightly so water won’t get in.

4. Test the operation of the transmitter with your

vehicle. If the transmitter does not work, try
resynchronizing the transmitter. (See
“Resynchronization” following.)

5. Resynchronize and then test the transmitter.

Resynchronization

Resynchronization may be necessary due to the 
security method used by this remote keyless entry
system. The transmitter does not send the same signal
twice to the receiver. The receiver will not respond to a
signal it has previously been sent. This prevents
someone from recording and playing back the signal
from the transmitter.

To resynchronize the transmitter with the receiver, do
the following:

1. Stand close to your vehicle.

2. Simultaneously press and hold the LOCK and

UNLOCK buttons on the transmitter for about seven
seconds. The door locks should cycle (lock and
unlock) to confirm resynchronization.

If the locks do not cycle, see your dealer for service.