Parking Lots- Page 76

yellow

blue     

2-16

The ignition key must be clean and dry before it’s
inserted in the ignition or the engine may not start. 
If the engine does not start and the SECURITY light 
is flashing, the key may be dirty or wet. Turn the
ignition off.

Clean and dry the key. Wait about three minutes and try
again. If the starter still won’t work, and the key appears
to be clean and dry, wait about three minutes and try
another ignition key. At this time, you may also want to
check the fuse (see “Fuses and Circuit Breakers” in the
Index). If the starter won’t work with the other key, your
vehicle needs service. If your vehicle does start, the first
ignition key may be faulty. See your dealer or a
locksmith who can service the PASS

-

Key II.

If you accidentally use a key that has a damaged or
missing resistor pellet, the starter won’t work. The
SECURITY light will then come on. But you don’t have
to wait three minutes before trying another ignition key.

See your dealer or a locksmith who can service the
PASS

-

Key II to have a new key made.

If you’re ever driving and the SECURITY light comes
on, you will be able to restart your engine if you turn it
off. Your PASS

-

Key II system, however, is not working

properly and must be serviced by your dealer. Your
vehicle is not protected by the PASS

-

Key II system.

If you lose or damage a PASS

-

Key II ignition key, see

your dealer or a locksmith who can service PASS

-

Key II

to have a new key made. In an emergency, call the Buick
Premium Roadside Assistance Center at
1

-

800

-

252

-

1112. In Canada, call 1

-

800

-

268

-

6800.