Uniform Tire Quality Grading; Traction ; Treadwear 200 Traction AA Temperature A- Page 304

6-53

Uniform Tire Quality Grading

Quality grades can be found where applicable on the tire
sidewall between tread shoulder and maximum section
width. For example:

Treadwear 200 Traction AA Temperature A

The following information relates to the system
developed by the United States National Highway
Traffic Safety Administration, which grades tires by
treadwear, traction and temperature performance. 
(This applies only to vehicles sold in the United States.)
The grades are molded on the sidewalls of most
passenger car tires. The Uniform Tire Quality Grading
system does not apply to deep tread, winter

-

type 

snow tires, space

-

saver or temporary use spare tires,

tires with nominal rim diameters of 10 to 12 inches 
(25 to 30 cm), or to some limited

-

production tires.

While the tires available on General Motors passenger
cars and light trucks may vary with respect to these
grades, they must also conform to federal safety
requirements and additional General Motors Tire
Performance Criteria (TPC) standards.

Treadwear

The treadwear grade is a comparative rating based on
the wear rate of the tire when tested under controlled
conditions on a specified government test course. 
For example, a tire graded 150 would wear one and 
a half (1 1/2) times as well on the government course 
as a tire graded 100. The relative performance of tires
depends upon the actual conditions of their use,
however, and may depart significantly from the norm
due to variations in driving habits, service practices and
differences in road characteristics and climate.

Traction 

--

 AA, A, B, C

The traction grades, from highest to lowest, are AA, 
A, B, and C. Those grades represent the tire’s ability 
to stop on wet pavement as measured under controlled
conditions on specified government test surfaces of
asphalt and concrete. A tire marked C may have poor
traction performance. Warning: The traction grade
assigned to this tire is based on straight

-

ahead 

braking traction tests, and does not include acceleration,
cornering, hydroplaning, or peak traction characteristics.