Black plate (5,1)
Buick Regal Owner Manual - 2013 - crc - 11/5/12
Instruments and Controls
5-5
Avoid covering the GPS antenna for
long periods of time with objects
that may interfere with the antenna's
ability to receive a satellite signal.
See
and
for the
location of the vehicle's antennas.
The compass system is designed to
operate for a certain number of
miles or degrees of turn before
needing a signal from the GPS
satellites. When the compass
display shows CAL, drive the
vehicle for a short distance in an
open area where it can receive a
GPS signal. The compass system
will automatically determine when
the GPS signal is restored and
provide a heading again. See
for more information on the
messages that may be displayed for
the compass.
Clock
The infotainment system controls
are used to access the time and
date settings through the menu
system. See
for information about how to use the
menu system.
Setting the Clock (Radio
with CD)
Setting the Time and Date
1. Press the CONFIG button and
select Time and Date Settings.
2. Select Set Time or Set Date.
3. Turn the Multifunction knob to
adjust the highlighted value.
4. Press the Multifunction knob to
select the next value.
5. To save the time and return to
the Time Settings menu, press
the BACK button at any time or
press the Multifunction knob
after adjusting the minutes.
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time and Date Settings.
2. Highlight 12/24 HR Format.
3. Press the Multifunction knob to
select the 12 hour or 24 hour
display format.
Setting the Month and Day Format
1. Press the CONFIG button and
select Time and Date Settings.
2. Highlight Month & Day format.
3. Press the Multifunction knob to
select the DD/MM/YYYY (day/
month/year), MM/DD/YYYY
(month/day/year), or YYYY/MM/
DD (year/month/day) display
format.