Bulb Replacement; Halogen Bulbs; High Intensity Discharge (HID) Lighting- Page 257

2020 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada-13557849) -

2020 - CRC - 6/25/19

256

Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, or any bulb changing
procedure not listed in this section,
contact your dealer.

Caution

Do not replace incandescent
bulbs with aftermarket LED
replacement bulbs. This can
cause damage to the vehicle
electrical system.

Halogen Bulbs

{

Warning

Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.

High Intensity Discharge
(HID) Lighting

{

Warning

The High Intensity Discharge
(HID) lighting system operates at
a very high voltage. If you try to
service any of the system
components, you could be
seriously injured. Have your
dealer or a qualified technician
service them.

After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Headlamps

Driver Side Shown, Passenger

Side Similar

1. Low Beam
2. High Beam

Low-Beam Headlamp/Daytime
Running Lamp (Base)

1. For the driver side bulb,

remove the windshield washer
bottle filler neck by firmly
pulling it straight up and out of
the bottle.

2. Remove the cap from the back

of the headlamp assembly.

Detailed Information for 2020 Buick Regal Owner Manual

Lists of information found in 2020 Buick Regal Owner Manual - Page 257

  • 1. Low Beam 2.
  • 1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle.
  • 2. Remove the cap from the back of the headlamp assembly.