License Plate Lamp; Replacement Bulbs; Vehicle Care- Page 268
2013 Buick verano Owner Manual
Table of Contents
Black plate (28,1)
Buick Verano Owner Manual - 2013 - crc - 10/17/12
10-28
Vehicle Care
License Plate Lamp
Lamp Assembly
Bulb Assembly
1. Bulb Socket
2. Bulb
3. Lamp Assembly
To replace one of these bulbs:
1. Push the left end of the lamp
assembly toward the right.
2. Turn the lamp assembly down to
remove it.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Turn the lamp assembly into the
lamp assembly opening
engaging the clip side first.
7. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-Up Lamp
921K
Deck Lid Taillamp
194
Fog Lamp
H11 LL
Front Parking/Turn
Signal Lamp
7444NA
High
‐
Beam
Headlamp
H9LL
License Plate Lamp
W5W LL
Low
‐
Beam
Headlamp
H11
Rear Turn
Signal Lamp
H21W
Stoplamp/Taillamp
7443
For replacement bulbs not listed
here, contact your dealer.
Detailed Information for 2013 Buick verano Owner Manual
Lists of information found in 2013 Buick verano Owner Manual - Page 268
- 1. Bulb Socket 2.
- 3. Lamp Assembly To replace one of these bulbs: 1.
- 2. Turn the lamp assembly down to remove it.
- 3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3).
- 4. Pull the bulb (2) straight out of the bulb socket (1).
- 5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly.
- 6. Turn the lamp assembly into the lamp assembly opening engaging the clip side first.
- 7. Push on the lamp side opposite the clip until the lamp assembly snaps into place.
Related Documents for 2013 Buick verano Owner Manual
All trademarks are property of their respective owners. Tightrope
Interactive