Remote Vehicle Start; Keys, Doors, and Windows- Page 13

2022 Chevrolet suburban Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

22_CHEV_Tahoe_Suburban_OM_en_US_U_84793869A_2021AUG09
04-Instruments and Controls_en_US
Instruments and Controls
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
Vehicle Care
background image

Chevrolet Tahoe/Suburban Owner Manual (GMNA-Localizing-U.S./Canada/

Mexico-15555985) - 2022 - CRC - 8/3/21

12

Keys, Doors, and Windows

To replace the battery:

1. Press the button on the side of the

remote key and pull the mechanical key
out. Never pull the mechanical key out
without pressing the button.

2. With the mechanical key removed, insert

a flat, thin object in the center of the
remote key to separate and remove the
back cover.

3. Lift the battery with a flat object.
4. Remove the battery.
5. Insert the new battery, positive side

toward the back cover. Replace with a
CR2032 or equivalent battery.

6. Push together the remote key.
7. Reinsert the mechanical key.

Remote Vehicle Start

If equipped with the remote start feature,
the climate control system will come on
when the vehicle is started remotely
depending on the outside temperature.

The rear defog and heated and ventilated
seats, if equipped, may also come on. See

Heated and Ventilated Front Seats

0

41

and

Vehicle Personalization

0

133

.

Laws in some communities may restrict the
use of remote starters. Check local
regulations for any requirements on remote
starting of vehicles.

Do not use remote start if the vehicle is low
on fuel. The vehicle may run out of fuel.

The vehicle cannot be remote started if:

.

The remote key is in the vehicle.

.

The hood is not closed.

Detailed Information for 2022 Chevrolet suburban Owner Manual

Lists of information found in 2022 Chevrolet suburban Owner Manual - Page 13

  • 1. Press the button on the side of the remote key and pull the mechanical key out.
  • 2. With the mechanical key removed, insert a flat, thin object in the center of the remote key to separate and remove the back cover.
  • 3. Lift the battery with a flat object.
  • 4. Remove the battery.
  • 5. Insert the new battery, positive side toward the back cover.
  • 6. Push together the remote key.
  • 7. Reinsert the mechanical key.