Attach safety belt and; tether when elevated; and working with an- Page 12

PALM SWITCH

The travel twist grip has an interlock switch built into the
top of it.

You must have your hand, or palm, on the top of the twist
grip for the following load handling functions to operate:
• Auxiliary raise or lower
• Traverse
• Extend or retract
• Pivot

Platform Safety  22

Platform Safety

21   Platform Safety

INTERLOCK PEDALS

The platform has two sets of foot operated interlock pedals.

One set, located on the pedestal, is for seated operation.

The second set, on the floor, is for standing operation.

You also use these floor pedals for braking while in the
standing position.  (See page 20)

You must have your feet on the correct set of pedals before
you can operate your truck.

KEEP THE SIDE GATES DOWN

• Keep the side gates down unless

you are leaving the truck or picking from
the side.  The truck will not operate with a gate up.

• Don't sit or climb on the side gates.

• Keep your entire body in the operator area.

HARNESS AND TETHER

Use your harness and tether whenever you are working
from a raised platform and have a side gate open.

Check the harness, tether, snap hooks and mounting points
daily for wear or breakage.  If it doesn't look safe don't
use the truck.  Report the problem to your supervisor.

Know the Hazards

FALLS CAN KILL

You can reduce the risk of injury by being extra careful
while working on an elevated Turret Stockpicker.

• Put the side gates down and keep your entire body inside

the operator area.

• Watch where you're going.  Running into an object could

cause you to fall.

• Wear your harness and keep your tether fastened when

working with an open side gate.

CHECK YOUR DISPLAY

If any truck function doesn't work, check the indicator
lights on the console display.

1

1

2

2

Falling from a raised platform can
cause serious injury or even death.

Attach safety belt and
tether when elevated
and working with an
open side gate.

 DANGER